[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ns] Measure the traffic for flow
>From: "Ken" <[email protected]>
>To: "NS2_mail" <[email protected]>
>Subject: [ns] Measure the traffic for flow
>Date: Fri, 14 Jul 2000 12:53:51 +0800
>MIME-Version: 1.0
>Content-Transfer-Encoding: 7bit
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
>
>Hi, everybody,
>
>I refered to Marc's tutorial for the method to measure the transmission
>rate.
>The example used three sinks to get the bytes every period.
>
>It, of course, worked, but however when I transfer it to my own work,
>the bytes are always "0".
>
>My questions are:
>
>1. Should the "Agent/LossMonitor" work with specified peer Agent? (It seems
>to be so.)
Well, it won't work with TCP since LossMonitor is uncapable of "ACKing". So I
guess you are left with UDP and it's alikes.
>
>2. If I want to measure the rate in the middle node instead of the end node,
>this may not work.
a sink's a sink, of course it won't work.
>
>Thanks for any suggestions !
>
>Ken
Tarik