[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: disconnecting a node from a LAN in ns
it's because the vlink is really a virtual link. It only represents connectivity
within the LAN. If you need to "disconnect" you should try at the LanRouter
level (?).
> X-Authentication-Warning: apache.utdallas.edu: bguru owned process doing -bs
> Date: Sun, 3 Oct 1999 17:44:48 -0500 (CDT)
> From: Guruprasad Bhaskar <[email protected]>
> To: [email protected]
> Subject: disconnecting a node from a LAN in ns
> MIME-Version: 1.0
>
>
> Hi,
>
> I created a LAN with say, 3 nodes using "make-lan" command in ns-2.1b5. I
> then initiated a TCP
> session with an external node (connected to the LAN through another
> node) as the source and one of the LAN nodes as the sink. After the
> session starts, I am not able to make the "vlink" ( which connects the
> TCP sink and the LAN) down. I am able to obtain the id of this vlink but
> the command "$link(src_id:dst_id) down" does not help. But with this
> command I am able to make the link down only before the TCP session
> starts, not after that.
>
> I would appreciate it if anybody can help me out of this problem,
>
> Thanx,
>
> Guru.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> "Great minds discuss ideas, average minds discuss events,
> small minds discuss people"
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ************************************************************
> Guruprasad Bhaskar
> Graduate student,
> Dept. of Electrical Engineering,
> University of Texas at Dallas
>
> Voice : (H) 972 671 0357 ; (W) 972 883 2305
>
> Residence : 2400 Waterview Pkwy #326
> Richardson, TX-75080
> ************************************************************
Tarik