Abstract

Multi-modality medical imaging systems have become increasingly important in research and clinical applications of biomedical imaging. Two complementary imaging modalities that have not yet been fully integrated into a multimodality system are Single Photon Emission Computed Tomography (SPECT) and Magnetic Resonance Imaging (MRI). To this end, our team has developed an MR compatible SPECT insert for simultaneous preclinical SPECT/MR imaging. The SPECT insert’s detector is composed of five rings Cadmium Zinc Telluride (CZT) detector modules and an interchangeable cylindrical multi-pinhole (MPH) collimator. This dissertation discusses several new and significant contributions made towards the development of our SPECT insert. We developed methods to determine optimized design parameters for MPH collimators for the SPECT insert. These methods were used to design two MPH collimators with different imaging resolutions. Simulation results demonstrated that both collimators can be used to obtain artifact-free SPECT images with the designed resolutions. We then developed novel techniques to fabricate the collimators using MR compatible materials. Without proper system calibration and data correction, SPECT images reconstructed from data acquired with our insert exhibit poor image quality. We developed a novel energy calibration method to identify the photopeak of the gamma photons from a Tc-99m source at all 24,320 detector pixels simultaneously and a two-stage detector uniformity correction method to identify and correct for non-uniformities and malfunctioning pixels in the detector modules. Additionally …

Date

2015

Authors

Andrew Joseph Rittenbach

Institution

Johns Hopkins University